The SHLF collection is made of raw, untreated stainless steel, known for its exceptional durability, strength, and resistance to corrosion. The surface of the collection is naturally smooth, featuring a brushed finish that resists oxidants, rust, and most environmental conditions. Unlike other metals, stainless steel does not develop surface oxidation over time, maintaining its appearance with minimal maintenance. Regular cleaning helps preserve its brushed finish and luster. Minor surface marks or variations are characteristic of the raw, untreated stainless steel material, enhancing its unique aesthetic. Please note that due to the material, some parts may have minor scratches from the production process. Additionally, there is a slight difference in appearance between the outer brushed surface and the inner surface.

SHLF is locally produced in Denmark. The raw stainless steel collection has had all unnecessary production steps removed, focusing on a simple, non-chemical surface finish.

The SHLF collection is designed to be mounted in nearly infinite combinations, both vertically and horizontally. Each piece can be placed next to, on top of, or individually from each other, depending on the desired look and need. Use a spirit level or a laser when mounting the pieces for a precise setup. Carefully check your wall type before mounting the shelves. The included wall screws/rawl plugs are only suitable for brick and concrete walls. For walls made of other materials, use appropriate screws/rawl plugs.

Do not exceed the maximum weight capacity of 5kg. Ensure the shelf is securely mounted to the wall using appropriate screws and rawlplugs suitable for your wall type. Keep out of reach of children and do not allow climbing or any other activity on the shelf. Regularly check for loose screws or signs of wear and tighten immediately if necessary. Always follow the installation and maintenance instructions, or consult a professional if you have any doubts about hardware or installation.

Wipe with a wet cloth and neutral soap, and then wipe off excess water with a tea towel until dry. To remove hard stains, we recommend using mineral spirits or rubbing alcohol. Do not clean with chlorine or chlorine-based chemicals, as this will cause the surface to rust. It’s also recommended to avoid fluorine, iodine, bromine, or chloride in cleaners. Other objects can cause rust on stainless steel.

SHLF was designed in 2022

€270 / DKK1995

Click to view pdf